Week13
接到你的joystick上面
就可以滴滴嘟嘟
改變一下程式碼
讓Joystick按下去的時候會回傳1
鬆開時會回傳0
按右上角的放大鏡
可以檢查收到0和1
再來把它寫成Porcessing的程式
讀到Joystick按下去就會變成紅色
放開就是白色
寫個UDP網路傳輸到老師的電腦
2020年12月7日 星期一
WEEK-13
MAKER UNO
Joystick:
Arduino:
void setup() {
Serial.begin(9600);
pinMode(2,INPUT_PULLUP);
pinMode(8,OUTPUT);
}
int state=0;
void loop() {
if(digitalRead(2)==LOW && state==0){
state=1;
Serial.write("1");
}
if(digitalRead(2)==HIGH && state==1){
state=0;
Serial.write("0");
}
delay(100);
}
Processing:
import hypermedia.net.*;
UDP udp;
void setup(){
size(300,200);
udp = new UDP(this, 6000);
udp.send("hello world","120.125.70.53",6100);
}
void draw(){
}
void mousePressed(){
udp.send("mousePressed", "120.125.70.53", 6100);
}
WEEK-12
MAKER UNO
與Processing連結 :
 |
Arduino: |
#define Do 523
#define Re 587
#define Mi 659
#define Fa 698
#define So 784
#define La 880
#define Ti 987
#define Doo 1046
void setup() {
Serial.begin(9600);
pinMode(2,INPUT_PULLUP);
pinMode(8,OUTPUT);
tone(8,Do);
delay(1000);
tone(8,Mi);
delay(1000);
tone(8,So);
delay(1000);
noTone(8);
}
void loop() {
while(Serial.available()>0){
int now = Serial.read();
if(now=='0') noTone(8);
if(now=='1') tone(8,Do);
if(now=='2') tone(8,Re);
if(now=='3') tone(8,Mi);
if(now=='4') tone(8,Fa);
if(now=='5') tone(8,So);
if(now=='6') tone(8,La);
if(now=='7') tone(8,Ti);
if(now=='8') tone(8,Doo);
}
}
Processing:
import processing.serial.*;
Serial myPort;
void setup(){
size(200,200);
myPort = new Serial(this,"COM4",9600);
}
void draw(){
}
void keyPressed(){
if(key=='0') myPort.write("0");
if(key=='1') myPort.write("1");
if(key=='2') myPort.write("2");
if(key=='3') myPort.write("3");
if(key=='4') myPort.write("4");
if(key=='5') myPort.write("5");
if(key=='6') myPort.write("6");
if(key=='7') myPort.write("7");
if(key=='8') myPort.write("8");
}
翰翰日記11
這禮拜用器材上課(joystick)
void setup()
{
pinMode(2,INPUT_PULLUP);
pinMode(8,OUTPUT);
}
void loop()
{
if(digitalRead(2)==LOW)tone(8,572,100);
else noTone(8);
}
這段程式碼可以按joystick讓maker板發出聲音
void setup()
{
Serial.begin(9600);
pinMode(2,INPUT_PULLUP);
pinMode(8,OUTPUT);
}
int state=0;
void loop()
{
if(digitalRead(2)==LOW && state==0)
{
state=1;
Serial.write("1");
}
if(digitalRead(2)==HIGH && state==1)
{
state=0;
Serial.write("0");
}
delay(100);
}
這段是在寫按下後送0或1
import processing.serial.*;
Serial myPort;
void setup(){
size(300,200);
myPort=new Serial(this, "COM4",9600);
}
int button=0;
void draw()
{
if(myPort.available()>0){
int now=myPort.read();
println("現在你讀的是:"+now);
if(now=='1')button=1;
else button=0;
}
if(button==1)background(255,0,0);
else background(255);
}
現在這隻程式碼是按一下板子就有數字跑出來
import hypermedia.net.*;
UDP udp;
void setup()
{
size(300,200);
udp=new UDP(this, 6000);
udp.send("hello teacher","120.125.70.53",6100);
}
void draw()
{}
void mousePressed()
{
udp.send("mousePressed","120.125.70.53",6100);
}
這個是網路程式可以給其他電腦發訊息
Bill_week13
一開始老師先教我們從做安裝MakerUno的東西，先安裝裝置。
再來把老師示範的程式碼打上去
接下來打程式，讓他沒有聲音
使用P語言來做東西，按下按鈕即可變成紅色的。
老師教我們寫網路程式，連線到老師那邊就會有顏色亮燈。
在前面黑板上投影機就會顯示:
程式備份:
import processing.serial.*;
Serial myPort;
void setup(){
size(300,200);
myPort = new Serial(this,"COM6", 9600);
}
int button=0;
void draw(){
if(myPort.available()>0){
int now = myPort.read();
println("現在你讀的是:"+now);
if(now=='1')button=1;
else button=0;
}
if(button==1)background(255,0,0);
else background(255);
}
2020年12月6日 星期日
Yang_week08
Week08
辨識滑鼠位置顏色
PImage img;
color nowColor;
void setup(){
size(500,500);
img=loadImage("01.png");
}
void draw(){
image(img,0,0);
fill(nowColor);rect(0,0,30,30);
}
void mouseMoved(){
loadPixels();
int now=width*mouseY+mouseX;
nowColor =pixels[now];
}
2020年11月30日 星期一
week12 發出音樂
簡單馬力歐開頭音樂
#define NOTE_C5 523
#define NOTE_E5 659
#define NOTE_G5 784
#define BUTTON 2
#define BUZZER 8
int melody[] = {
NOTE_E5, NOTE_E5, 0, NOTE_E5, 0, NOTE_C5, NOTE_E5, 0, NOTE_G5
};
int noteDurations[] = {
10, 10, 10, 10, 10, 10, 10, 10, 10
};
int pin;
int ledArrayHigh;
int ledArrayLow;
boolean mode = false;
boolean buttonPressed = false;
void setup()
{
delay(1000);
pinMode(BUTTON, INPUT_PULLUP);
for (pin = 3; pin < 14; pin++) {
pinMode(pin, OUTPUT);
}
for (int thisNote = 0; thisNote < 9; thisNote++) {
int noteDuration = 1000 / noteDurations[thisNote];
tone(BUZZER, melody[thisNote], noteDuration);
int pauseBetweenNotes = noteDuration * 1.30;
delay(pauseBetweenNotes);
noTone(BUZZER);
}
}
void loop()
{
for (pin = 0; pin < 5; pin++) {
if (digitalRead(BUTTON) == LOW &&
buttonPressed == false) {
buttonPressed = true;
mode = !mode;
pin = 0;
if (mode == false) {
tone(BUZZER, NOTE_C5, 100);
delay(100);
tone(BUZZER, NOTE_G5, 100);
delay(100);
noTone(BUZZER);
}
else if (mode == true) {
tone(BUZZER, NOTE_G5, 100);
delay(100);
tone(BUZZER, NOTE_C5, 100);
delay(100);
noTone(BUZZER);
}
}
if (mode == false) {
ledArrayHigh = 13 - pin;
ledArrayLow = 7 - pin;
}
else if (mode == true) {
ledArrayHigh = 9 + pin;
ledArrayLow = 3 + pin;
}
digitalWrite(ledArrayHigh, HIGH);
digitalWrite(ledArrayLow, HIGH);
delay(100);
digitalWrite(ledArrayHigh, LOW);
digitalWrite(ledArrayLow, LOW);
if (pin == 4) delay(100);
}
if (buttonPressed == true) {
buttonPressed = false;
}
}
訂閱：
文章 (Atom)